Huntington Gardens

I took my in-laws to experience the wonder of Huntington Gardens and the Rose Garden Tea room last Monday. As usual, the gardens did not disappoint.

It was a leisurely walk around the gardens, though not so much for me because I was trying to make sure that the in-laws were okay and not getting too hot, tired or overheated. I also was trying to keep an eye on my mother-in-law, who really wanted to take a cutting off some of the plants to take back home to plant (she lives in Southeast Asia).

She said, "I should have brought a larger purse." Ai-yah! I told her that we'd get into a lot of trouble if she did. She did look around for fallen clippings or broken succulents that she could pick up and take, but to her disappointment, there were none.

I took them for afternoon tea for lunch. I knew that the food wasn't really something they're used to, but nevertheless it was an experience that would be memorable for them. They really liked all the fresh fruits, especially strawberries, which are hard to come by and expensive in their country. They weren't too keen on some of the sandwiches or cheese and my MIL remarked that the cheese didn't really taste good or special. Good cheese isn't really available where they live, nor is it a common food -- I think Velveeta is probably gourmet over there. The smoked salmon sandwich with caviar and the cheeses were among my favorites, so I set aside any possible embarrassment of my own gluttony and ate plenty to make up for what the in-laws didn't eat! ;)

My mother-in-law had to take several breaks along the way due to her health, so I took some of those opportunities to take some silly self-portraits with my knitting. In trying to take some of the photos, I unraveled my stitches several times and had to start over with my cast-on at least twice. Oh well. The orange yarn is some cheap superwash wool that I bought a while back. I'm thinking that this will be a sun hat project, but I think the reality is that this project will probably be untouched for the next few months. :-P

Threesome

About a month ago, I finally sent off the pattern and yarn to my test knitters for "Threesome" for Handicraft Café. Several months earlier, Zona and her family were kind enough to volunteer to be my models for the original hats. I specifically designed the pattern so that a knitter can knit 3 hats with 3 balls of yarn and get 3 very different looks. The resulting hat ensemble is a coordinated set for a family or to be distributed among friends.
My wonderful testers, Amy and Veronica, were not only speedy, they also gave great constructive feedback and did a wonderful job on the hats.

Over the weekend, I brought the fabulous hats to at get-together at Aubrey's. A couple of friends loved the hats so much that they immediately put them on and struck some fierce poses. In particular, they loved the color combination that we had Veronica knit. The impromptu photo shoot yielded a slew of fantastic, silly and funny photos. But unfortunately, it was a little dark and the results were not superb, even with some photo editing.

Derrick and Julian even dressed an orange with the baby hat and mounted it on a bottle of Heineken. And after working hard to show off his debonnaire style and poses, Aubrey thanked him with a massage, which resulted in a rather pornlicious snapshot.

As fabulous as some of these photos turned out, I don't think we could use them in the final print pattern - the resolution is not good enough for print, and they may just be a little too risqué for more conservative folks who want to knit a tame family project. However, some the the photos may end up on the Handicraft Café site as we continue to work on the programming for the search functions in the e-shop and the rest of the website. I think Derrick just started a new trend for all our future photo shoots. We may just have to enlist his modeling skills for the hats Amy made and some other upcoming projects. :)

Glad To Be Back!

I must apologize, for the blog disappearing act. The hubs had to upgrade some server stuff (stuff I don't understand), so I wasn't able to post anything for a while, nor were folks able to access the site. Thanks for all your patience and for blog readers/visitors who emailed me about your inability to access the patterns and for waiting.

The most exciting update that I have is that I FINALLY finished editing Twister and posted it for sale on Ravelry. I'm still working on adding more, but please do visit my Ravelry Pattern Store, where you can find Twister for sale, and some of my free patterns on a handy and pretty pdf download.


I also reformatted and added new instructions for the Yarn Swift on a pdf. The formatted pdf swift pattern is only $1.99 and contains an extra set of instructions for a lazy susan swift not available in the html version. Don't worry, the html version is still available on this blog for free, but I decided to charge the miniscule amount for the pdf version because of the time it took to reformat (not to mention all the hours spent writing it in the first place), and hopefully, it'll help pay for some of the website fees.

For non-Ravelers, I also posted Twister for sale on my Etsy shop. Hopefully, soon I will be able to figure out how to post the pattern for sale on the blog as well. I guess I have to learn really quickly how to do that.

And the Winners Are...

Thanks again for everyone's participation in the Twister Contest on this blog and on Ravelry.
The winners are Bethany of hookedupknits, So KnitPicky, and SJ of KnitWit.

I will send you the pattern very soon!! I sill have some minor edits and review to do.

Twister update & Contest

Quite a few people have been messaging me on Ravelry regarding Twister (previous blog post here; Ravelry link here), and inquiring whether it's ready. ALMOST! A great artist (my sis) is making new template layouts for me to make my patterns pretty for pdf, and I've already started converting my patterns, including the freebies and part of Twister to the new pdf format.

2 of my test knitters are done. THANK YOU!! Visit their blogs and/or Ravelry pages to check out their handiwork.
Tinker's blog
Tinker's Rav. page
CraftyCanadian's blog
CraftyCanadian's Rav. page

::CONTEST:: We all love them, don't we? All you have to do is to read through the rest of this post and then answer the question at the end of this post either by posting a comment or emailing me. I will do a random drawing of all who answer. There will be at least 3 winners (number of winners to be determined at my discretion). Winners will receive a final color laser- printed copy of Twister, Super Twister (being tested, see photos) and/or Mega Twister (in development) in protective plastic sleeves. Super Twister is Twister on bulky yarn, and Mega Twister is Twister done on polar/super bulky yarn. And if I happen to be having a good day, I'll send winners some yarn too. Contest ends: February 15, 2008.

Prototype of Super Twister. Yarn: Misti Alpaca Chunky.

Midway through the testing process, I wrote an alternative way in which the hat could be knit, using a provisional cast on and knitting on 2 circulars. CraftyCanadian knit hers the original way, while Tinker's version is a combination of the original way and new way -- the main hat is the old way, and her brim is the new way. A third tester, BunnySquirrel, will be doing hers using the new way. Actually, CraftyCanadian is starting another one using the new way, and her eagle eyes has caught some of my draft errors.

So what's the difference? The difference lies within the construction. I don't think there are true "pros" and "cons" in either way, because I think it's a matter of skill level, preference and how easy do you want to have it when working the pattern. Nonetheless, here are a few points that I think would/could be applied to each method:

The original way: the hat starts with a spiraling rib (so that it doesn't curl), then the rest of the body is the twisted stitch pattern. The brim is worked separately by picking up stitches along the cast on edge, shaped and then sewn together. Skill Level - intermediate. Pro: No pesky needles (except than the double points) to get in the way; easier to work than the new way. Con: Although there is an illusion of continuity from brim to crown that one can't really see unless they are a pro with eagle eyes, it's not seamless and "perfect".

The new way: The hat starts with working the brim, then the hem and the rest of the body is worked. There is no sewing of seams, and there's no spiraling rib pattern. Requires working on 2 circulars, off of 3 needles, and provisional cast on. Skill Level - advanced. Pro: True continuity of the spiraling stitch pattern from brim to crown; no seams between hat body and brim; built-in hem. Con: Working the brim first may be annoying, as it may get in the way when starting the hat body, can be confusing/challenging for a less experienced knitter.

Two versions? I was thinking of offering Twister as 2 separate patterns - one for intermediate, and one for advanced. Right now, I can't wrap my head around how to combine both options into one pattern without it being totally confusing to the end user, especially since the way you start and cast on is so different between the two. If I were to offer only one version, I think I'd do the advanced version, but that may turn away (scare off?) less experienced knitters. ETA: As CraftyCanadian stated in her comment, the skill set required to work the advanced version is quite different than the intermediate version. The difference is not just a matter of working on dpns versus 2 circulars. It includes casting onto 2 circulars provisionally more than once, and working a hem with 3 needles.

What do you think? Would you like to have the option of having an intermediate method and an advanced version of the pattern? Or would you hate to see someone selling 2 versions of the same pattern separately, albeit utilizing different techniques?

ETA: If you'd like to part of the drawing, please make sure that I will be able to contact you in case you win and include your email or blog address. This is especially for non-blogger users. I am unable to reply or find out who you are if you are not commenting through a blogger username/account.

EDIT #3: Moving my comment here for better visibility. ..Oh wow! Thank you all for your thoughts, comments and suggestions so far! You've definitely given me options that I had not thought of before, but will definitely weigh. Here's another question based on your comments:

So for those in the camp of packaging the 2 separate patterns together as a set, would you be willing to pay a little more for it then? I'd still have to format and figure out size/cost, but hypothetically, say, I was planning to sell at $6 for most single patterns, would you pay $9 for the set then? If I were to combine a package clearly labeling the 2 separate pattern & pattern techniques, it would drive my cost up, not just the amount of work, but also in pdf (file size, storage, photos, uploads, memory) and in printing, if I were to also sell paper patterns (paper, printing, ink, protective sheet costs. Thanks again!

Thanks!!

Twister at Whole Foods

Last Wednesday, my blogless friend Rachel organized a public stitching event at the Whole Foods in Tustin. Folks from at least 3 different local knit/crochet groups attended. It was a fabulous event where we were able to socialize with people we otherwise don't normally see or come across, and where we were able to meet new people. Another rather fabulous part of the Whole Foods experience, is all the yummy foods! The dining area of this whole foods is right behind the chocolate and dessert bar, so I was surrounded by some of the most wonderful smells in the world: wool and chocolate. Yum.

While at Whole Foods, CraftyCanadian of One Too Many Projects brought her newly finished Twister that she was test knitting for me, modeled here and here by her friend. If you are on Ravelry, then CraftyCanadian's Twister Project page is here. CraftyCanadian used Socks That Rock Heavyweight yarn.

If you are not on Ravelry and don't know what it is, the best way to describe it is that it is like MySpace for fiber artists, but 100 times better due to all the wonderful special features of the site. Warning though -- Ravelry is really well done and easy to use, so it can be very addictive.

Needle Holder

Since I still don't have the yarn yet, I can't start my designs for the follow-up of the Sensual Knits book, I decided to spend my waiting time designing other things. Last night, I worked on finishing "Super Twister," which I started 2 days ago. I worked in bed as I do many nights, and as always, I'm always looking around the floor, on the bed, between the sheets, etc., etc. for my needles, pens and other knitting things. I always find them eventually. However, no matter how much I looked, I could not find one of my dpns. I thought maybe the snoring hubby or the cats were sleeping on it, but after flipping them all over, I still found nothing. I finally gave up and decided to finish my hat with my remaining dpns, then I brushed my teeth and went to bed.

A few hours later, I awoke to something poking my chest. It turned out that my dpn had fallen in my shirt and decided to snuggle between my bra and boobs. (Since I am abnormally large, especially for an Asian girl, I am afraid of sagging when I get older, so I do wear a bra to sleep on most nights.) Anyway, I pulled my needle out and went back to bed. I don't know why I didn't notice it before. Thank goodness, it was a 5" US #10 (6mm) dpn
instead of something like a #1 dpn -- I shudder at the mishaps that could happen with such a tiny needle. From now on, I will be looking at my boobs the next time I lose a needle.

Twister

I've been playing so much on Ravelry that I almost forgot about my blog. Ha! I didn't really get what people were talking about at first when I heard my knitting friends rave about the site, but I GET IT! It is very well organized, easy to set up and navigate, AND the folks on the forums provide a bunch of wonderful and helpful information. I'm still catching up on updating my stuff, including my knitting projects and my patterns.

One of the projects/patterns that I listed is my Twister cap. I designed and finished it about 1 year ago, but I didn't post any photos or talk about it because I was trying my hand at submissions. Unfortunately, both Knitty and Interweave Knits rejected this project. After some hemming and hawing about whether I should try and submit elsewhere, I finally decided that I wanted to self-publish and sell the pattern. So, thanks to some lovely volunteers, Z's Momma, Bunny Squirrel, and Crafty Canadian, Twister is getting test knitted. No matter how many times I have knitted it (counting many prototypes and samples, it's at least 6+ total) and checked the pattern for errors, there's no way that I can catch the same errors and typos that test knitters may catch for me. Furthermore, it's a way to see if the instructions that I wrote are clear and concise.

Anyhow, as soon as I get the comments back from my lovely test knitters, I will officially release the pattern, which I'm really excited about. Now if you'll allow me to toot my own horn for a little bit: Since posting it on Ravelry about 2 weeks ago, to date, the project and pattern has been marked as a favorite by other Ravelers a total of over 30 times. This totally strokes my confidence to see that people like my work, and though I'm really not afraid or upset by rejection at all (I mean, seriously, the editors do have a difficult job of picking from 100s and 1000s of great designs to suit their respective publications.), it does make the slight disappointment seeing the words "we are sorry" all go away. Thanks y'all!!

Now, if I can just figure out and learn how to set up a shopping cart and pdf download system on this blog...

Argyle Skullcap

My knitting friends accuse me of being a little crazy and too ambitious. Am I really?

For the last several months, I've had the idea that it'd be cool to knit an argyle hat or cap with skulls in it. Not that I'm into skulls or argyle, but it'd be interesting, no? Especially since those are 2 of my sister's favorite patterns/motifs. I never thought I'd try it, because I knew it'd be hellish to knit.

Then, one very late night (surprise, surprise), about 4-5 days before Xmas, I dug through my bucket of leftover yarn and came up with some yarns that are similar (but not quite exact) in gauge and stayed up to start charting for Argyle Skullcap (working title).

The next day, I went to the knitting group with my chart and 4 yarns in tow. Fast forward lots of tangling, untangling and tinks, I began to see some results. In the end, I did screw up some one of the colors, but I was too lazy to undo it by that point, and it looked almost intentional. I am happy with the results considering that I had very little time to do it, and I just found leftover yarn that didn't quite match in weight to do it in. I finished it about 3 hours after my sister drove in from San Francisco on Xmas eve, and I think she really likes her gifts -- a big tin of gourmet cookies, a pair of argyle tights and the Argyle Skullcap.

I would show y'all photos of the fair isle nightmare inside, but I forgot to document that. I don't know if other knitters are also masochists and would want to knit this, but it there is enough interest, I think I will rework the gauge and chart and release it as a pattern. If you're on Ravelry, it's here.

Oh, and ironically, my sis was wearing her skeleton t-shirt the night I gave her the hat. It was not planned.

Hats and Headbands

Since I forgot to photograph the Hunter's Orange hat that made for Linh's husband, she took some for me. It turns out that Nick's head is huge. I had already made it big, but apparently I erred.


Being a hunter who grew up in a village in Arkansas, I guess I half-expected that I'd get a photo of Nick posing. However, this photo really makes me cringe and uncomfortable, no matter how much I love Linh and Nick. That's one large hunting arrow -- too big for this former 10+ year vegetarian who still has problems eating some meat.

On a lighter note, my sister and her friends were sweet enough to model the reversible headbands they had bought from me. Thanks!!

Hunter's Orange

Have you ever tried to find yarn in hunter's orange? It's certainly no easy task. A few weeks ago, I scoured my well-stocked LYS in search of a superwash wool in Hunter's Orange, and even with the help of the shop owner, we really didn't come up with more than 2-3 yarns in the appropriate shade.

Why that particular shade? Linh's husband Nick is a hunter. *gasp* Just the word "hunter" does not sit well with me, since I was a strict vegetarian for 11 years. (And although I am no longer a vegetarian, I really don't eat much meat, and when I do, it's usually just chicken and seafood.) Nick requested that I make him a hat with earflaps for him for the chilly early morning hunting outings with his friends and family in Arkansas. If they weren't such good friends, I surely would've said "no."

Most oranges were more rust and a few scary neon ones. I couldn't find any superwash, but I finally settled on a worsted weight virgin wool that was the perfect shade, albeit not superwash. There was some Anny Blatt superwash that came as a close second, but the color still was not right. I ended up knitting the hat by double stranding it and working it on US #7 so that it's extra thick. For the earflaps, I continued the double stranding and thrummed it with some merino and alpaca roving. Nick will surely have warm ears! Because the virgin wool is a little scratchy, I soaked it first in hair conditioner and then later with Soak wool rinse.

Unfortunately, I forgot to photograph the hat. Even more unfortunate is that Linh reports Nick's head is super large and the hat is a little snug. Bummer. Maybe it'll be tight enough to distract him and make him miss shooting Bambi and Mama Deer.

All Quiet on the Knitting Front

My hand had been causing me problems all last week. It's my tendonitis and I wasn't using the computer much, so I must have slept on it funny. Anyway, as hard as it was, just like any other obsessed addict, I stayed away from knitting and did not pick up my needles for about 10 days! Ai-yah! I'm sure other knitters out there can relate to the agony and pain of not knitting for 10 days. So my advice for you knitters out there is to use an ergonimic mouse and ask for one at work if you use it a lot in your job. That's how I ended up with the tendonitis. Owwie.

So at my knitting group on Wednesday, I picked up my needles and knitted some lace swatch samples (not worth photographing) for a few projects that I want to do. Yesterday, I resumed working on the Kitty hat I was making for my sister. It's part of a kitty accessories set for her. I already made her fingerless glove gauntlets with claws, per her request. I actually named the gloves "Catty" and submitted the pattern to Knitty. But alas, I was rejected with the response that although the pattern "is really fun but unfortunately not right for Knitty." I'm still not posting the photos yet though because I'm trying to see if there's another fun knitting pub that I can try submitting to. I don't think this is up MagKnits' alley. The option I'm leaning towards is just posting it on Craftster's forum and putting up the free pattern on this blog.

Project: This WIP is a modified version of the kitty hat from the Stitch n Bitch book.
Yarn: Manos del Uruguay, #108
Needles: Using 2 US 10 circulars (don't have a 16")

Another project that I worked on is a simple lace scarf for a former colleague. She requested a fuzzy pink scarf. I admitted my yarn snobbery and told her I don't work with fun fur novelty yarns, so this is what I came up with.

Project: Simple Keyhole lace scarf, my own pattern
Yarn: Knitted 2 stranded with 1 strand of hand-painted kid mohair, and 1 strand of hand-painted worsted weight merino wool.
Needles: US #15

See, I HAVE been busy!

I finally got the photo publishing thing fixed, so I'm catchin' up! These aren't in any particular order though...

I made this for my dear friend Jean a couple weeks ago, per her request. The yarn is a merino that Jean dyed the yarn at the slumber party. The pattern is the one from Stitch n Bitch.
A few weeks ago, Zona had a booth at a local craft fair held over one weekend, where she sold her hand-dyed and hand-spun yarns. So puuurrrty! Anyway, when I went to visit and support Zona on the Saturday of the fair, she said I could put out some of my hand-painted yarns and give selling a try. I only had 2-3 skeins, so after being inspired by Zona, I embarked on a dye fest Saturday night. On Sunday, the first thing I sold was some recycled yarn that I painted (picture on left) so that every stitch would knit up a different color.

Below: Pictures of Zona's booth and yarns. She actually had a lot more stuff, but she sold them all before I remembered to take a picture! yay Zona!


Below: Some of my dyed yarns. I still need to re-skein (is that a word?) them, especially the 60cashmere/40merino ones, since I don't think most people will buy 400 yds of hand-painted cash/merino in one breath. Plus, the colors look better when it's mixed up a little. (L-R: cotton, recycled shetland, cash/merino, cash/merino, cash/merino, cotton, merino, cotton)

Here is a picture of my overstuffed needle case. The large one is my main one, and it's overstuffed with double-points, circulars, straights, crochet hooks, and stitch holders. It was so overstuffed that I really couldn't find anything, especially at 6am when I'm trying to find a project to bring with me to work on during my commute to/from work. The green sari fabric one is my travel needle case. I made a circular case (black Asian print) to alleviate the overstuffing. This circular one can be hung on a hanger or wall, and can be folded up and become portable. Well, it'd be a little more portable if I had made the yellow part a little more narrow. The numbers are embroidery yarn.